Memory - DDR4 2400MHz

HyperX Fury Black 4GB DDR4 2400MHz - North PC
translation missing: en.products.product.regular_price £45.58
translation missing: en.products.product.regular_price £45.58

HyperX HX424C15FB/4 is a 512M x 64-bit (4GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 512M x 8-bit FBGA components per module. Each module kit supports Intel Extreme Memory Profiles (Intel XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V.


Main Features:

  • Power Supply: VDD=1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD=2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self-refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • Height 1.340 inches (34.04mm), w/heatsink
Corsair Vengeance LPX 4GB, DDR4, 2400MHz - North PC
translation missing: en.products.product.regular_price £47.99
translation missing: en.products.product.regular_price £47.99
VENGEANCE LPX memory is designed for high-performance overclocking. The heat spreader is made of pure aluminium for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Specifications:
Size 4GB (1x4GB)
Memory Model Vengeance LPX Black
Max. Memory Channels Provided by Kit Single (1)
Memory Type DDR4
Memory Type (ECC) Non-ECC
Memory Type (R/U) UDIMM (Unbuffered)
Memory Speed PC4-19200 (2400)
Pins 288
CAS Latency 16-16-16-39
Voltage 1.2 V
Validated Compatible with  
Cooler Anodised Aluminium Heat spreader
Features
  • Black PCB
  • XMP 2.0
Warrenty Lifetime Limited Warranty
Corsair Vengeance LPX 4GB, DDR4, 2400MHz (Red) - North PC
translation missing: en.products.product.regular_price £47.99
translation missing: en.products.product.regular_price £47.99
VENGEANCE LPX memory is designed for high-performance overclocking. The heat spreader is made of pure aluminium for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Specifications:
Size 4GB (1x4GB)
Memory Model Vengeance LPX Red
Max. Memory Channels Provided by Kit Single (1)
Memory Type DDR4
Memory Type (ECC) Non-ECC
Memory Type (R/U) UDIMM (Unbuffered)
Memory Speed PC4-19200 (2400)
Pins 288
CAS Latency 16-16-16-39
Voltage 1.2 V
Validated Compatible with  
Cooler Anodised Aluminium Heat spreader
Features
  • Black PCB
  • XMP 2.0
Warrenty Lifetime Limited Warranty
ADATA XPG Z1 Red 4GB DDR4 2400MHz - North PC
translation missing: en.products.product.regular_price £51.14
translation missing: en.products.product.regular_price £51.14

The XPG Z1 DRAM Module is the first DDR4 overclocking memory of the XPG series, which supports the latest Intel® Haswell-E platform for ultimate performance. It’s designed for overclockers, gamers, and PC enthusiasts thanks to its remarkable performance and power efficiency. With the benefits of DDR4, the XPG Z1 is definitely a powerful weapon for gaming and overclocking!

  • Superior Power Efficiency: a 20% reduction of power
  • Thermal Conductive Technology (TCT) for great heat dissipation
  • High-quality 10-layer black PCB with 2oz of copper for superior stability and cooling performance
  • RoHS compliant
  • 1 x 4GB Stick
ADATA GAMMIX Black 8GB 2400MHz - North PC
translation missing: en.products.product.regular_price £83.81
translation missing: en.products.product.regular_price £83.81
XPG GAMMIX D10 DDR4 memory modules are designed for gamers and PC enthusiasts with support for new Intel X299. With 10-layer PCBs, D10 improves signal transfer quality and maintains stable operation at all times. It also supports Intel XMP 2.0 for quicker and safer overclocking. Available in black and red, D10 has an eye-catching serrated heatsink with an open top and 2oz of copper for excellent cooling performance through rapid heat removal. In addition, its low height allows easy installation even in systems with limited space. Like all ADATA memory modules, GAMMIX D10 comes with a lifetime warranty backed by excellent service for maximum peace of mind.
 
  • Unique heatsink design for better dissipation
  • Low profile heatsink for effortless installation
  • Supports the latest Intel X299 platform and
  • Superior power efficiency: 20% less draw than DDR3
  • (operating voltage decreased from 1.5V to 1.2V)
  • Intel XMP 2.0 – more accessible overclocking
  • 10-layer PCBs and 2oz copper for excellent cooling
  • and stability
  • RoHS compliant
  • 1 x 8GB Stick
Corsair Vengeance LPX 8GB, DDR4, 2400MHz - North PC
translation missing: en.products.product.regular_price £83.99
translation missing: en.products.product.regular_price £83.99
VENGEANCE LPX memory is designed for high-performance overclocking. The heat spreader is made of pure aluminium for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Specifications:
Size 8GB (1x8GB)
Memory Model Vengeance LPX Black
Max. Memory Channels Provided by Kit Single (1)
Memory Type DDR4
Memory Type (ECC) Non-ECC
Memory Type (R/U) UDIMM (Unbuffered)
Memory Speed PC4-19200 (2400)
Pins 288
CAS Latency 16-16-16-39
Voltage 1.2 V
Validated Compatible with  
Cooler Anodised Aluminium Heat spreader
Features
  • Black PCB
  • XMP 2.0
Warrenty Lifetime Limited Warranty
Corsair Vengeance LPX 8GB, DDR4, 2400MHz (Red) - North PC
translation missing: en.products.product.regular_price £83.99
translation missing: en.products.product.regular_price £83.99
VENGEANCE LPX memory is designed for high-performance overclocking. The heat spreader is made of pure aluminium for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Specifications:
Size 8GB (1x8GB)
Memory Model Vengeance LPX Red
Max. Memory Channels Provided by Kit Single (1)
Memory Type DDR4
Memory Type (ECC) Non-ECC
Memory Type (R/U) UDIMM (Unbuffered)
Memory Speed PC4-19200 (2400)
Pins 288
CAS Latency 16-16-16-39
Voltage 1.2 V
Validated Compatible with  
Cooler Anodised Aluminium Heat spreader
Features
  • Black PCB
  • XMP 2.0
Warrenty Lifetime Limited Warranty
HyperX Fury Black 8GB DDR4 2400MHz - North PC
translation missing: en.products.product.regular_price £86.50
translation missing: en.products.product.regular_price £86.50
HyperX HX424C15FB2/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. 
 
Features
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD = 2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
  • Low-power auto self-refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Single-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
Corsair Vengeance LPX 8GB (2 x 4Gb), DDR4, 2400MHz - North PC
translation missing: en.products.product.regular_price £89.99
translation missing: en.products.product.regular_price £89.99
VENGEANCE LPX memory is designed for high-performance overclocking. The heat spreader is made of pure aluminium for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Specifications:
Size 8GB (2x4GB)
Memory Model Vengeance LPX Black
Max. Memory Channels Provided by Kit duel (2)
Memory Type DDR4
Memory Type (ECC) Non-ECC
Memory Type (R/U) UDIMM (Unbuffered)
Memory Speed PC4-19200 (2400)
Pins 288
CAS Latency 16-16-16-39
Voltage 1.2 V
Validated Compatible with  
Cooler Anodised Aluminium Heat spreader
Features
  • Black PCB
  • XMP 2.0
Warrenty Lifetime Limited Warranty
Corsair Vengeance LPX 8GB (2 x 4Gb), DDR4, 2400MHz (Red) - North PC
translation missing: en.products.product.regular_price £89.99
translation missing: en.products.product.regular_price £89.99
VENGEANCE LPX memory is designed for high-performance overclocking. The heat spreader is made of pure aluminium for faster heat dissipation, and the eight-layer PCB helps manage heat and provides superior overclocking headroom.
Specifications:
Size 8GB (2x4GB)
Memory Model Vengeance LPX Red
Max. Memory Channels Provided by Kit duel (2)
Memory Type DDR4
Memory Type (ECC) Non-ECC
Memory Type (R/U) UDIMM (Unbuffered)
Memory Speed PC4-19200 (2400)
Pins 288
CAS Latency 16-16-16-39
Voltage 1.2 V
Validated Compatible with  
Cooler Anodised Aluminium Heat spreader
Features
  • Black PCB
  • XMP 2.0
Warrenty Lifetime Limited Warranty
HyperX Predator 8GB DDR4 2400MHz - North PC
translation missing: en.products.product.regular_price £90.08
translation missing: en.products.product.regular_price £90.08
HyperX HX424C12PB3/8 is a 1G x 64-bit (8GB) DDR4-2400 CL12 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 12-14-14 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. 
  • Power Supply: VDD = 1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD = 2.25V to 3.6V
  • On-Die Termination (ODT)
  • 16 internal banks; 4 groups of 4 banks each
  • Bi-Directional Differential Data Strobe
  • 8-bit pre-fetch
  • Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
  • Height 1.661” (42.20mm) 
ADATA XPG Z1 Red 8GB DDR4 2400MHz - North PC
translation missing: en.products.product.regular_price £92.11
translation missing: en.products.product.regular_price £92.11

The XPG Z1 DRAM Module is the first DDR4 overclocking memory of the XPG series, which supports the latest Intel® Haswell-E platform for ultimate performance. It’s designed for overclockers, gamers, and PC enthusiasts thanks to its remarkable performance and power efficiency. With the benefits of DDR4, the XPG Z1 is definitely a powerful weapon for gaming and overclocking!

  • Superior Power Efficiency: a 20% reduction of power
  • Thermal Conductive Technology (TCT) for great heat dissipation
  • High-quality 10-layer black PCB with 2oz of copper for superior stability and cooling performance
  • RoHS compliant
  • 1 x 8GB Stick

Login